Brick Effect Tiles

Brick effect tiles reproduce the format, texture and colour variation of fired brick in porcelain and ceramic. They are specified where the design calls for a brick or metro read but the substrate, weight allowance or maintenance regime rules out real masonry, and they are widely used in hospitality, retail and workplace feature walls.

Specifying brick effect tiles

• Bond pattern and joint. Stack, running and herringbone bonds each change the read of the same tile. For elongated formats, keep the offset in a running bond to no more than one third of the tile length, as recommended in BS 5385, to control lippage where the tile has any bow.
• Face variation. Ranges are produced with a set number of printed faces. Check the V rating for shade variation and dry-lay a sample area before fixing, so a repeat is not read across a large wall.
• Internal or external. For external elevations confirm frost resistance to ISO 10545-12 and water absorption to ISO 10545-3, and specify a C2-class flexible adhesive to BS EN 12004 with full bed coverage.
• Handmade and glazed effects. Uneven glaze, crackle and undulating faces are part of the intended appearance in some ranges. Confirm this is understood by the client and the installer before fixing, because it is otherwise raised as a defect.

Related surfaces include concrete effect tiles and small format tiles for other module-scale wall treatments.

Frequently asked questions

Can brick effect tiles be used outside?

Where the range is rated for it. Confirm frost resistance to ISO 10545-12 and water absorption of 3% or less to ISO 10545-3, and check the fixing specification, since external wall tiling requires a flexible adhesive, full coverage and movement joints at closer centres than an internal wall.

Are brick effect tiles suitable for floors?

Some ranges are, some are wall-only. The controlling factors are breaking strength to ISO 10545-4, abrasion class to ISO 10545-7 and wet slip resistance. Check the technical data sheet rather than assuming a floor rating from the format.

What is the advantage over real brick slips?

Lower water absorption, no efflorescence risk, dimensional consistency that makes setting out predictable, and a cleanable glazed or through-body surface. Porcelain also carries an A1 reaction to fire classification to EN 13501-1 without further testing.